|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
The ICAL calibrator is not just good, it is an excellent solution for calibration, calibration and maintenance of sensors, production processes and these are not words, but practice.
Log single-point and multi-point data.
Remote control of the calibrator from a PC is possible.
The Calibrator can:
Generate signals: triangle, truncated sine wave, square wave, programmable signal, simulate thermocouple and thermal resistance signals, serve as a current source -4 mA to 24 mA, a voltage source from -3 to 15 V, serve as a frequency source from 0.3 Hz to 20 kHz.
Measure electrical signals with high accuracy - loop current, mV and voltage sensor signals.
Generate and measure signals from a large number of thermocouples and RTDs.
Scan and log measured values with specified parameters.
Program cold junction compensation.
DTMF (Dual Tone Multi-Frequency) function - allows you to test audio devices and the telephone line.
Program and set calibrations to save in memory and download to a PC.
See attached file for specifications.