|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Allied Vision HR 100GigE hr928C100GE-FF Industrial Camera
Downloads:
PDF Instruction 1
The Allied Vision hr928C100GE-FF is an advanced ultra-high-resolution industrial camera equipped with a color Sony IMX928 CMOS sensor deliver extraordinary 68.20 Megapixel image capturing capability. Operating over an ultra-fast 100GigE interface via QSFP28 connector standard, it streams uncompressed image data at up to 138 frames per second without packet bottleneck.
Featuring advanced GigE Vision 3.0 compliance and RDMA hardware support, this device eliminates host CPU load during extreme bandwidth transmissions. Integrated frame buffers of 4032 MB RAM and 32 GB Flash memory guarantee lossless image queuing and reliable image data acquisition in demanding high-speed inspection scenarios.
Application Areas
- Flat panel display (FPD) and semiconductor wafer inspection
- Aerial photography, mapping, and geospatial surveying
- High-speed industrial automation and continuous quality control
- High-resolution 3D metrology and PCB surface defect detection
- Traffic monitoring, surveillance, and sports motion tracking
Specifications
| Parameter | Value |
| Model Code | hr928C100GE-FF (F004313) |
| Sensor Model | Sony IMX928 CMOS Color |
| Resolution | 8256 x 8256 (68.20 MP) |
| Pixel Size | 2.74 um x 2.74 um |
| Shutter Type | Global Shutter |
| Max Frame Rate | 138 fps |
| Spectral Range | 400 nm to 1000 nm (IR-Cut 680 filter) |
| Interface | 100GigE (QSFP28 connector) |
| Vision Standard | GigE Vision 3.0 (PTP, RDMA support) |
| On-board RAM Buffer | 4032 MB |
| Non-volatile Flash | 32768 MB |
| Digital I/O Ports | 12-pin Hirose (2x 24V in, 2x Open drain out, RS422) |
| Power Supply | 24 to 25 VDC (30W typical consumption) |
| Dimensions and Weight | 92 x 58 x 58 mm, 550 g |
| Lens Mount | Flat Front |
Package Contents
- Allied Vision hr928C100GE-FF Industrial Camera
- Flat Front Mount protective cover
- Factory calibration and data sheet documents