|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
SVS-Vistek FXO fxo530MXGE 10GigE Industrial Camera
Downloads:
PDF Instruction 1
The SVS-Vistek FXO fxo530MXGE represents the pinnacle of high-bandwidth machine vision engineering, integrating the advanced 24.6 Megapixel Sony IMX530 Pregius S CMOS monochrome sensor. Utilizing a high-speed 10GigE interface with standard RJ-45 connectivity, this industrial camera delivers up to 49.6 frames per second at full 5328 x 4608 resolution, providing uncompromised image clarity and throughput for demanding automated optical inspection systems.
Equipped with an expansive 896 MB internal RAM image buffer and RDMA hardware acceleration support, the camera guarantees reliable frame transfers without packet loss under peak computational loads. The robust thermal management housed within a compact 76 x 50 x 50 mm IP30 aluminum housing enables operational stability across an extended temperature range from -10 °C up to +60 °C.
Featuring advanced firmware functionality including hardware trigger sequencers, 4-channel PWM strobe control, precise time protocol (PTP IEEE 1588), flat-field correction, and dynamic defect pixel correction, the fxo530MXGE integrates seamlessly into complex vision architectures using standard C-mount optics.
Application Scenarios
- Automated semiconductor wafer and printed circuit board (PCB) inspection
- High-speed print quality control and packaging verification
- Flat panel display glass defect detection and solar cell inspection
- High-precision 3D metrology, traffic monitoring, and aerial surveying
- Robotic guidance and high-throughput sorting systems
Technical Specifications
| Parameter | Value |
| Model Code | fxo530MXGE (F002443) |
| Sensor Model | Sony IMX530 Pregius S CMOS (Monochrome) |
| Optical Format | Type 1.2 (14.6 x 12.63 mm, 19.3 mm diagonal) |
| Active Resolution | 5328 x 4608 pixels (24.60 Megapixels) |
| Pixel Dimensions | 2.74 µm x 2.74 µm |
| Shutter System | Global Shutter |
| Maximum Frame Rate | 49.6 fps |
| Digital Interface | 10GigE (RJ-45, GigE Vision 2.0 / 3.0, GenICam) |
| Sensor Bit Depth | 8-bit, 12-bit (Mono8, Mono12) |
| Exposure Control | 5 µs to 60 s (Manual, Auto, External Trigger) |
| Gain Control | 0.0 dB to 48.0 dB |
| On-board Memory | 896 MB RAM image buffer, 32 MB Flash |
| Digital I/O Ports | 1x Opto-isolated Input, 2x 24V Input, 4x Open Drain Output, 1x RS232 Input/Output |
| I/O Connector | 12-pin Hirose HR10A-10P-12S |
| Power Requirements | 10 V to 25 V DC (12 W typical consumption) |
| Lens Mount | C-Mount |
| Protection Glass | K9 with Anti-Reflective Coating (400 nm to 850 nm) |
| Protection Class | IP30 |
| Dimensions and Weight | 76 x 50 x 50 mm, 240 g |
| Operating Temperature | -10 °C to +60 °C (housing temperature) |
| Firmware Features | ROI, LUT, Shading Correction, FFC, DPC, PTP IEEE 1588, RDMA, Sequencer, PWM(4) |
Package Contents
- SVS-Vistek FXO fxo530MXGE 10GigE Camera Body
- Dust Protection Cap for C-Mount
- Factory Calibration Data Certificate