|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
EV charging station test adapter Fluke FEV300/TY2 Type 2 safety tester
Description Fluke FEV300/TY2
The EV charging station test adapter Fluke FEV300/TY2 is a compact testing solution designed to simulate vehicle connection and perform safety and functional testing on Mode 3 AC charging stations. Equipped with a Type 2 connector (FEV300-CON-TY2), the Fluke FEV300/TY2 simulates Proximity Pilot (PP) and Control Pilot (CP) states, allowing technicians to test charging capabilities and safety standards according to IEC/EN 61851-1 and IEC/HD 60364-7-722. This Type 2 EVSE tester enables full safety diagnostics, PE pre-tests, and fault condition simulations without requiring an electric vehicle on site.
Application field Fluke FEV300/TY2
The EV charging station test adapter Fluke FEV300/TY2 is designed for certified electrical installers, commissioning engineers, and commercial EVSE maintenance technicians. It is widely used to evaluate public AC charging pillars, wallboxes in commercial buildings, fleet parking structures, and residential charging stations in conjunction with multifunction installation testers or oscilloscopes.
Specifications Fluke FEV300/TY2
| Input voltage | Up to 250 V (single phase) / up to 480 V (three phase), 50/60 Hz |
| Max throughput current | 10 A max. |
| Plug Type | Type 2 (IEC 62196-2) 7P three-phase |
| Safety standards | IEC/EN 61010-1, CAT II 300 V, protection class III |
| Ingress protection | IEC 60529: IP54 (housing) |
| Operating temperature | -20 °C to 40 °C |
| Dimensions (H x W x D) | 110 x 45 x 220 mm |
| Weight | Approx. 1 kg |
| PP Simulation states | Open, 13 A, 20 A, 32 A, 63 A |
| CP States simulation | State A, B, C, D |
| Error simulations | CP Error 'E', PE Error 'F' (Earth fault) |
| Measuring terminals | L1, L2, L3, N, PE and CP signal output |
Package contents Fluke FEV300/TY2
- EV charging station test adapter Fluke FEV300/TY2
- Type 2 connector plug FEV300-CON-TY2
- Soft carrying case
- User manual and safety documentation