|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Gas Piston Gauge Fluke PG9607 (11 kPa to 500 kPa)
Description
The Gas Piston Gauge Fluke PG9607 (11 kPa to 500 kPa) is an automated primary pressure reference standard engineered for gas absolute and gauge pressure measurements. Featuring an advanced 50 mm tungsten carbide piston-cylinder assembly, the Fluke PG9607 supports up to 100 kg mass load with extremely low uncertainty. The platform utilizes a remote electronics module to isolate heat sources, ensuring exceptional temperature stability and measurement reproducibility during extended automated calibration routines.
Application field
Designed for national metrology institutes, primary calibration laboratories, and defense research centers. Typical application scenarios include:
- Primary reference standard for low-uncertainty gas pressure calibration
- Automated unattended pressure sensor testing with COMPASS for Pressure software
- Absolute and gauge pressure calibrations up to 500 kPa
- Advanced pressure gap study using controlled clearance pressure technology
Specifications
| Parameter | Value |
| Pressure Range | 11 kPa to 500 kPa (Gauge and Absolute) |
| Operating Media | Nitrogen, Helium, Dry Air |
| Piston Diameter | 50 mm |
| Piston and Cylinder Material | Tungsten carbide |
| Maximum Mass Load | 100 kg |
| Sensitivity | 0.005 Pa + 0.5 ppm |
| Reproducibility | ± 2 ppm + 0.05 Pa |
| Piston Drop Rate | < 0.25 mm/min at 500 kPa |
| Ambient Temp Measurement Uncertainty | ± 1 °C |
| Piston Temp Measurement Uncertainty | ± 0.1 °C |
| Communications Ports | RS-232, IEEE-488 |
| Power Requirements | 85 to 264 VAC, 50/60 Hz, 22 VA max |
| Base Platform Weight | 34 kg |
| Base Dimensions (HxWxD) | 34.1 cm x 54.3 cm x 52.3 cm |
Package contents
- Gas Piston Gauge Fluke PG9607 base platform
- PG local terminal
- Remote electronics module
- User manual