|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
High-Speed 100GigE Camera Allied Vision hr929M100GE-FF
Downloads:
PDF Instruction 1
The Allied Vision hr929M100GE-FF is an ultra-high-performance industrial camera engineered for extreme bandwidth demands. Powered by the 50.40 Megapixel Sony IMX929 CMOS monochrome sensor with a global shutter, it delivers exceptional optical precision at high capture rates. Operating through a ultra-fast 100GigE digital interface via a QSFP28 optical connection, this camera eliminates transmission bottlenecks, enabling smooth real-time image processing without frame loss.
Built upon the cutting-edge GigE Vision 3.0 standard with zero-copy RDMA protocol support, the camera guarantees minimal CPU latency while achieving up to 225 frames per second at maximum resolution. Featuring an massive 4032 MB onboard RAM buffer and 32768 MB Flash memory, it ensures complete data integrity during peak burst captures. Its flat front design and rigorous thermal architecture allow stable continuous operation in harsh industrial environments.
Application Scenarios
- High-speed semiconductor and PCB inspection
- Flat-panel display optical quality control
- Aerial mapping, surveillance, and photogrammetry
- Scientific research and particle image velocimetry (PIV)
- Rail and infrastructure high-resolution monitoring
Specifications
| Parameter | Value |
| Model | hr929M100GE-FF (Code: F004314) |
| Sensor Model | Sony IMX929 CMOS (Mono) |
| Sensor Type | Area scan, Global Shutter (Type 1.8) |
| Resolution | 8200 × 6152 (50.40 MP) |
| Pixel Size | 2.74 µm × 2.74 µm |
| Spectral Range | 400 nm to 1000 nm (K9 AR glass 400-850nm) |
| Max Frame Rate | 225 fps |
| Interface | 100GigE (QSFP28 Connector) |
| Vision Standard | GigE Vision 3.0 with RDMA support |
| Bit Depth / Pixel Formats | 8/10/12-bit (Mono8, Mono10, Mono12) |
| Exposure Range | 8 µs to 60 s |
| Gain Range | 0.0 dB to 48.0 dB |
| On-board Memory | 4032 MB RAM, 32768 MB Flash |
| I/O Connectors | 12-pin Hirose (2x 24V IN, 2x Open Drain OUT, RS422 IN/OUT) |
| Power Requirements | 24 to 25 VDC (30 W typical) |
| Operating Temperature | -10 °C to +60 °C (housing) |
| Dimensions & Weight | 92 × 58 × 58 mm, 550 g |
| Lens Mount | Flat Front (FF) |
| IP Rating | IP30 |
Package Contents
- Allied Vision hr929M100GE-FF camera body
- 12-pin Hirose I/O mating adapter sheet
- Quickstart and compliance documentation