|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
User Manual PDF | Data Sheet PDF
Heavy-Duty Industrial Electrician Combo Kit
The Fluke 87V MAX E2 Industrial Electrician Combo Kit is built for professional electricians working in the most demanding environments. Centered around the ultra-rugged Fluke 87V MAX True-RMS Digital Multimeter with IP67 waterproof/dustproof protection and 4-meter drop resistance, this comprehensive kit includes specialized SureGrip test leads, probes, and hanging accessories required for high-energy electrical diagnostics.
Industrial Use Cases
- Variable Frequency Drive (VFD) Diagnostics: Accurately measuring voltage and frequency on noisy pulse-width modulated motor drive signals using the built-in low-pass filter.
- Extreme Environment Electrical Servicing: Conducting safe electrical checks in wet, dusty, or cold sites (-40 °C to +55 °C) under CAT IV 600 V / CAT III 1000 V standards.
- Plant Maintenance and Troubleshooting: Monitoring signal fluctuations, recording transients down to 250 us with Peak Min/Max mode, and measuring temperature via the included thermocouple.
Key Specifications
| Parameter | Range / Detail |
|---|---|
| DC Voltage | 0.1 mV to 1000 V (Accuracy: 0.05% + 1) |
| AC Voltage (True-RMS) | 0.1 mV to 1000 V (Accuracy: 0.7% + 4) |
| AC/DC Current | 0.1 uA to 10 A (20 A overload for 30 s max) |
| Resistance / Capacitance | 0.1 ohm to 50 Mohm / 0.01 nF to 9999 uF |
| Temperature Range | -200.0 °C to 1090 °C (-40 °C to 260 °C with included probe) |
| IP Rating / Drop Resistance | IP67 waterproof and dustproof, 4-meter drop tested |
| Safety Rating | CAT IV 600 V / CAT III 1000 V |
Package Contents
- Fluke 87V MAX True-RMS Digital Multimeter
- TL224 SureGrip Silicone Insulated Test Leads
- AC220 SureGrip Heavy Duty Alligator Clips
- TL238 SureGrip Insulated Test Probes
- ToolPak TPAK Magnetic Meter Hanging Kit
- 80BK-A DMM Temperature Probe
- Removable Holster / Probe Holder
- Three AA batteries (installed)