|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Data Sheet PDF | User Manual PDF
Two-Pole Voltage and Continuity Tester with Backlit LED Scale
The Fluke T110 Two-Pole Voltage and Continuity Tester is a rugged industrial diagnostic instrument designed to verify voltage presence or absence in compliance with IEC EN 61243-3:2014 safety standards. Featuring clear LED scale indicators, audible beeper, and tactile vibration feedback under load, the T110 ensures rapid voltage detection even with fully discharged batteries. Constructed with heavy duty dual insulated wiring tested to triple standard flex requirements, this tool operates reliably under CAT IV 600 V / CAT III 690 V safety conditions.
Industrial Use Cases
- Verification of Discharged Voltage Status: Checking electrical circuits, busbars, and distribution cabinets before performing installation or maintenance work.
- Switchable Load and RCD Testing: Utilizing pushbuttons to draw extra current from the circuit under test, eliminating ghost voltage readings and testing RCD protection devices.
- Three-Phase System Alignment: Determining phase rotation sequence on industrial drive motors and 3-phase feeds alongside single-pole live phase identification.
Key Specifications
| Parameter | Value |
|---|---|
| Voltage Range (AC/DC) | 12 V to 690 V |
| Continuity Testing | 0 to 400 kohm (Visual LED + Switchable Beeper) |
| Frequency Range | 0 / 40 Hz to 400 Hz |
| Phase Rotation Determination | 100 V to 690 V |
| Input Impedance & Current Draw | 200 kohm (3.5 mA @ 690 V) / Load buttons pressed: 7 kohm (30 mA @ 230 V) |
| Safety Rating & IP | CAT IV 600 V / CAT III 690 V, IP64 |
| Dimensions & Weight | 26 cm x 7 cm x 3.8 cm / 280 g |
Package Contents
- Fluke T110 Two-pole Voltage and Continuity Tester
- Push-on probe tips and probe tip protector
- Probe storage accessory
- 2 x AAA batteries
- Instruction sheet