|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Data Sheet PDF | User Manual PDF
Two-Pole Voltage, Continuity, and Resistance Tester with Backlit LCD
The Fluke T150 Two-Pole Voltage and Continuity Tester is a rugged diagnostic instrument engineered for commercial and industrial electricians. Built according to IEC EN 61243-3:2014 safety standards, it enables safe, fast verification of voltage presence or absence - even with discharged batteries. The Fluke T150 features four distinct indicator methods (LED scale, digital LCD screen, audible tone, and tactile vibration) alongside resistance measurement up to 1999 ohms under CAT IV 600 V / CAT III 690 V safety conditions.
Industrial Use Cases
- Verification of Discharged Voltage Status: Testing power lines and industrial distribution panels prior to maintenance, verifying zero voltage state without battery dependency.
- Switchable Load and RCD Testing: Drawing higher current under test via dedicated pushbuttons to prevent false ghost voltage readings and trigger residual-current devices (RCDs).
- 3-Phase System Diagnostic Checks: Determining phase rotation sequence on three-phase motors and power supplies alongside low-resistance troubleshooting up to 1999 ohms.
Key Specifications
| Parameter | Value |
|---|---|
| Voltage Measurement Range | 6 V to 690 V AC / DC |
| Resistance Measurement Range | Up to 1999 ohm |
| Continuity Testing | 0 to 400 kohm (Visual LED + Switchable Beeper) |
| Phase Rotation Determination | 100 V to 690 V |
| Input Impedance & Current Draw | 200 kohm (3.5 mA @ 690 V) / Load buttons pressed: 7 kohm (30 mA @ 230 V) |
| Safety Rating & Ingress Protection | CAT IV 600 V / CAT III 690 V, IP64 |
| Power & Weight | 2 x AAA batteries / 180 g |
Package Contents
- Fluke T150 Two-pole Voltage and Continuity Tester
- Push-on probe tips and probe tip protector
- Storage accessory for probes
- 2 x AAA batteries
- Instruction sheet