|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
AC Current Probe Fluke i1000s 1000A 100kHz BNC CAT III 600V
Description
The high-performance AC Current Probe Fluke i1000s 1000A 100kHz BNC CAT III 600V is engineered to expand oscilloscope applications in demanding industrial and power systems. Delivering high measurement precision, the Fluke i1000s allows accurate non-intrusive current readings from 100 mA to 1000 A rms across a broad frequency bandwidth from 5 Hz to 100 kHz. Equipped with a built-in passive filter that eliminates noise and ringing on rapidly rising waveforms, this professional oscilloscope current probe connects via a reinforced coaxial cable with an insulated BNC connector, maintaining strict electrical safety standards up to CAT III 600 V.
Application field
Applications and scenarios:
- Harmonic current analysis and distorted waveform diagnostics on industrial oscilloscopes
- Non-intrusive current measurement in switchgear, motor drives, and power conversion systems
- Power quality testing and noise filtering in complex industrial power networks
- Field service troubleshooting using oscilloscopes or multimeters with optional PM9081/001 adapter
Specifications
| Parameter | Value |
| Nominal Current Ranges | 10 A / 100 A / 1000 A AC |
| Continuous Current Range | 0.1 A - 10 A / 0.1 A - 100 A / 1 A - 1000 A AC |
| Maximum Non-Destructive Current | 2000 A AC |
| Lowest Measurable Current | 0.1 A AC |
| Basic Accuracy (48 Hz to 65 Hz) | 1% + 1 A (% reading + floor) |
| Frequency Bandwidth | 5 Hz to 100 kHz |
| Output Sensitivity | 100 mV/A (10 A) / 10 mV/A (100 A) / 1 mV/A (1000 A) |
| Max Conductor Diameter | 54 mm (2.12 in) |
| Output Connection | Reinforced coaxial cable (1.6 m) with insulated BNC connector |
| Safety Rating | CAT III 600 V / CAT IV 300 V per IEC 61010-1 |
Package contents
- AC Current Probe Fluke i1000s
- User documentation