|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
AC/DC Current Clamp Fluke 80i-110s 100A 11.8mm BNC CAT II 600V
Description
The high-precision AC/DC Current Clamp Fluke 80i-110s 100A 11.8mm BNC CAT II 600V is designed for non-intrusive current diagnostics in both AC and DC systems up to 100 A. Optimised for use with Fluke ScopeMeter test tools, oscilloscopes, and multimeters, the Fluke 80i-110s features dual output sensitivity settings (100 mV/A and 10 mV/A) and a BNC connector for direct signal capture. This versatile oscilloscope current probe accommodates conductors up to 11.8 mm in diameter, delivering superior measurement precision across a broad frequency range from DC to 100 kHz while maintaining compliance with CAT II 600 V and CAT III 300 V electrical safety standards.
Application field
Applications and scenarios:
- Waveform analysis and non-intrusive AC/DC current monitoring using oscilloscopes and ScopeMeter tools
- Diagnostics in automotive electrical systems, battery circuits, and low-power drive controls
- Troubleshooting industrial control loops, power supplies, and power harmonic analyzers
- Field service testing with digital multimeters using optional BNC-to-banana adapters
Specifications
| Parameter | Value |
| Nominal Current Ranges | 10 A / 100 A AC/DC |
| Continuous Current Range | 0.1 A - 10 A / 1 A - 100 A AC/DC |
| Maximum Non-Destructive Current | 140 A (at 2 kHz) |
| Lowest Measurable Current | 0.1 A |
| Basic Accuracy (100 mV/A setting) | 50 mA to 10 A: ±3% of reading + 50 mA |
| Basic Accuracy (10 mV/A setting) | 50 mA to 40 A: ±4% + 50 mA / 40 A to 80 A: ±12% + 50 mA / 80 A to 100 A: ±15% |
| Usable Frequency Range | DC to 100 kHz |
| Output Sensitivity | 10 A range: 100 mV/A / 100 A range: 10 mV/A |
| Max Conductor Diameter | 11.8 mm (0.46 in) |
| Output Cable Length / Connector | 1.6 m cable with BNC connector |
| Zero Error Adjustment | Yes |
| Power Supply / Battery Life | 9V battery, 55 hours |
| Safety Rating | CAT II 600 V / CAT III 300 V (IEC 1010, CSA-C22.2 No. 1010-1) |
Package contents
- AC/DC Current Clamp Fluke 80i-110s
- User documentation