|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
Data Sheet PDF 1 | Data Sheet PDF 2 | Data Sheet PDF 3
Non-Contact FieldSense Electrical Tester
The Fluke T6-600 Electrical Tester utilizes FieldSense technology to measure AC voltage, AC current, and frequency without making direct galvanic contact with live conductors. Featuring a 17.8 mm open fork jaw opening, this instrument accommodates conductors up to 120 mm2 (AWG 4/0), providing fast diagnostics for up to 600 V AC/DC and 200 A AC under strict CAT III 600 V safety parameters.
Industrial Use Cases
- Electrical Cabinet Maintenance: Measuring live conductor voltage and current in crowded junction boxes without removing wire nuts or insulation.
- Commercial Facility Operations: Rapid troubleshooting of lighting panels, distribution boards, and branch circuits using a compact, pocket-sized tester.
- HVAC and Motor Control Diagnostics: Verifying power supply parameters on motors, pumps, and control systems using True-RMS measurement routines.
Key Specifications
| Parameter | FieldSense Open Fork | Test Leads Required |
|---|---|---|
| AC Voltage (True-RMS) | 16 V to 600 V (Resolution: 1 V, Accuracy: 3% + 3) | Yes (600 V standard) |
| AC Current (True-RMS) | 0.1 A to 200.0 A (Resolution: 0.1 A, Accuracy: 3% + 3) | No |
| DC Voltage | N/A | 1 V to 600 V (Accuracy: 1% + 2) |
| Resistance | N/A | 1 ohm to 2000 ohm (Accuracy: 1% + 2) |
| Jaw Opening / Cable Capacity | 17.8 mm / Wires up to AWG 4/0 (120 mm2) | N/A |
| Safety Rating & IP | CAT III 600 V | N/A |
Package Contents
- Fluke T6-600 Electrical Tester
- Attached Test Leads with Removable 4 mm Probe Caps
- Installed AA Batteries
- Quick Reference Guide