|
Quantity
|
Cost
|
||
|
|
|||
|
|
|||
AC Current Clamp Fluke i200s 200A BNC CAT III 600V
Description
The high-precision AC Current Clamp Fluke i200s 200A BNC CAT III 600V is a dual-range AC current clamp designed to extend the measuring capabilities of oscilloscopes, ScopeMeters, and digital multimeters without breaking the circuit. Featuring dual measurement ranges of 20 A and 200 A, the Fluke i200s outputs voltage proportional to the measured current via a safety-insulated BNC connector. Supplied with a dual banana to BNC adapter, this versatile oscilloscope current probe ensures exceptional signal accuracy and high electrical safety up to CAT III 600 V.
Application field
Applications and scenarios:
- Non-intrusive AC current waveform observation on ScopeMeters and portable oscilloscopes
- Power quality auditing and current analysis in commercial and light industrial systems
- Diagnostics on small electric motors, HVAC circuits, and distribution panels
- Field service measurements using multimeters via the included BNC-to-banana adapter
Specifications
| Parameter | Value |
| Nominal Current Ranges | 20 A / 200 A AC |
| Continuous Current Range | 0.1 A to 24 A / 0.5 A to 200 A AC |
| Maximum Non-Destructive Current | 240 A AC |
| Lowest Measurable Current | 0.1 A AC |
| Basic Accuracy (48 Hz to 65 Hz) | 1.5% + 0.5 A (% reading + floor) |
| Usable Frequency Range | 40 Hz to 10 kHz |
| Output Sensitivity | 100 mV/A (20 A range) / 10 mV/A (200 A range) |
| Max Conductor Diameter | 20 mm (busbar 20 x 5 mm) |
| Output Connection | 2 m cable with safety-insulated BNC connector and BNC-to-banana adapter |
| Safety Rating | CAT III 600 V (600 V AC max) |
Package contents
- AC Current Clamp Fluke i200s
- Dual banana to BNC adapter
- User documentation